If you are looking for the VCOM USB Driver, and want to install it on your computer. Then, you are the right, on this page, you will learn how to install VCOM USB Driver on your computer. In this post, you will get an official link to download the VCOM Driver.
Movic W3 VCOM USB Driver for Flashing Firmware
Driver Name: VCOM Driver
Driver Size: 401.69 KB
Download in progress…
How to connect Movic W3 with PC using VCOM Driver
Here you will learn how to install VCOM USB Driver on your laptop/PC step by step. If you didn't understand the above video tutorial. You can follow the images, and we also attached a few images for your reference.
Step 01: First of all, you need to download the USB driver and extract it on your desktop, see the below image:
Step 02: Now, You should open Device Manager >>> Action >>> Add legacy hardware. See the below image:
Step 03: After that, click the Next button to Add legacy hardware wizard. See the below image:
Step 04: Now, You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next button. See the below picture:
Step 05: After successfully done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:
Step 06: Now, Click on Have Disk Button > Locate at the Android VCOM Driver (Android_Gadget_CDC_driver.inf) on your Computer.
Step 07: Once VCOM Driver is listed in the blank area, now click on Next button to continue.
Step 08: Now, Again Click on Next Button.
Step 09: Now, you will see a pop-up message "Install this driver software anyway" in the Windows security prompt window. If you would like to install, you need to click the correct option. See the below image:
Step 08: Finally, you have done successfully, click the Finish button to complete the installation. See the below Image:
Cool, you may enjoy your Android device is now connected with your Computer PC/laptop.
