If you are using any Qualcomm processor device and want to flash the stock firmware. If your device is dead, and now you are finding a way to unbrick it, then you are on the right page. Here, you can download and install Qualcomm HS-USB QDLoader 9008 driver to flash your the stock ROMs using Qualcomm USB driver. You will learn how to install Qualcomm USB Driver on Windows 10 and Windows 11 computer. In this post, you will get an official link to download the Qualcomm USB Driver, Qualcomm HS-USB QDLoader 9008 driver, Qualcomm Flash Tool, QFIL, etc.
Konka L2 Yunos Qualcomm Driver for Flashing Firmware
Download in progress…
How to Install Qualcomm Driver On Windows 11 Computer?
You need to download and extract the Qualcomm driver on your desktop.
- Now, open Device Manager -->>> Action -->>> Add Legacy Hardware.
Then, click the “Next” button under the Add legacy hardware wizard. To install Qualcomm Driver on your Computer.
Now, select “Install the hardware that I manually select from the list (Advanced)” and click the Next button.
After successfully done, Show all devices, click the Next button, and select the extracted file from your computer.
Then, install new hardware by clicking the Next button to continue installing.
Now, you will see a pop-up message "Install this driver software anyway" in the Windows security prompt window. If you would like to install, you need to click the correct option.
Finally, you have done successfully, click the Finish button to complete the installation.
That’s it. Now You have successfully installed a Qualcomm Driver, and your device is now connected with your computer.