Download And Install MediaTek VCOM USB Driver for Intex EcoNC
VCOM USB Driver For Intex EcoNC
If you are looking for the VCOM USB Driver, and want to install it on your computer. Then, you are the right, on this page, you will learn how to install VCOM USB Driver on your computer. In this post, you will get an official link to download the VCOM Driver.
Download VCOM Driver of your Intex EcoNC for Flashing Firmware
On this page, you can download the latest version of the VCOM MediaTek USB Drivers for your computer. Here you will also learn how to install the VCOM MTK USB Driver manually on your PC? yayvomark.com always helps you with on all steps. First of all, you need to download VCOM MTK Driver from below given link, and follow the below instructions. If you don't understand the below guide. We have attached a few images for your reference. Step 1: First, download and extract VCOM USB Driver on your Computer or Laptop desktop to install easily. See the below image:
Step 2: Now, you should open Device Manager from your PC/Laptop >>> Action >>> Add Legacy Hardware. See the below image:
Step 3: Click the “Next” under the Add legacy hardware wizard. See the below image:
Step 4: Now, Click “Install the hardware that I manually select from the below list (Advanced)” and continue installing by clicking the “Next” button. See the below image:
Step 5: The Next step is to Show all devices, click the Next button, and select files from your computer. See the below image:
Step 6: Then, select the “usb2ser_Win7” setup for the 32-bit operating system or select the “usb2ser_Win764” setup for the 64-bit operating system. See the below image:
Now, click the “Next” to start installing your new hardware on your computer. See the below image:
Step 8: After that, Click “Install this driver software anyway” in the Windows security prompt window. See the below image:
Step 9: Next, click “Finish” to complete the installation. See the below image:
You have installed successfully VCOM driver on your computer.
How to install VCOM Driver Video Tutoarial?
How to install Intex EcoNC Driver manually?
First of all, Download and extract the driver zip folder on your PC.
Now, You need to open Device Manager and click the "Add the Legacy Hardware Menu" Option and then click the "Next" button.
Then, Select install the hardware, you can select manually from drop down list.
After that Go to Locate the extracted driver manually on your computer screen and then Click Add.
Finally your Driver have installed and listed in your device manager.